Electric Heating
Looking for industrial electric heating elements? Heattec® is your specialist for industrial heating including industrial electric heating elements, infrared radiation elements and control equipment. Heating elements specifically designed for industrial use, so you can count on the highest possible reliability. The industrial heating elements come from European suppliers and manufacturers, with which we guarantee the highest possible quality. Meanwhile, we ensure a low price and you can count on free shipping for orders over € 200.
Looking for a specific model, part or are y looking for advice? Please contact one of our specialists for this.
-
-
Immersion Heater Triple Loop Triple-U
The stainless steel tube and polyester screw cap ET electrical resistors range comes with brass coupling plug is used to heat all kinds of liquids.
Learn More
€228.00 -
Immersion Heater 2’’1/2 BSP with 3 S/S U-shaped Ø12,5 elements
- Europa range
- Threaded Stainless Steel 321 M77x2 or 2"1/2 BSP Plug
- With 3 Stainless Steel 321L U-Shaped Ø10 Elements
- Comes with sheath for thermostat
Learn More€229.00 -
Electric Batteries with Rectangular Fin Heating Elements (ALBAT Range)
- ALBAT Models
- with rectangular fin heating elements
- Galvanized Fe plate frame. Optionally, and on request, stainless steel chassis.
- Dismountable connection box.
- Shielded tubular heating elements in AISI 304 stainless steel of Ø8 mm, heating element insulated with electro-melted magnesium oxide and compressed by lamination
- Aluminised plate fin 25 x 50 mm.
- Crimped M12 zinc steel connectors.
- Maximum application temperature: air output 100 °C with air = 2 m/sec
Learn More€246.00 -
-
Immersion Heater M77x2 or 2’’1/2 BSP PLUG
Threaded brass M77x2 or 2’’1/2 BSP plug with 3 nickeled copper u-shaped Ø16 elements, comes with sheath for thermostat
Learn More€317.00 -
Electric Batteries with Spiral Fin Heating Elements (AHBAT Range)
- AHBAT Models
- with spiral fin heating elements
- Galvanized Fe plate frame. Optionally, and to order, stainless steel chassis.
- IP40 damp protection rating
- New system of connection box with flap opening without removing the lid.
- Shielded tubular heating elements in AISI 304 stainless steel of Ø10 mm, heating element insulated with electro-melted magnesium oxide and compressed by lamination.
- Stainless steel AISI 430 fin of Ø26mm outside diameter
- Crimped M14 zinc steel connectors.
Learn More€360.00 -
-
Immersion Heater M77x2 with 3 S/S 316L U-shaped Ø10 elements
- Europa range
- Threaded Stainless Steel 321 M77x2
- With 3 Stainless Steel 321L U-Shaped Ø10 Elements
- Comes with sheath for thermostat
Learn More€405.00 -
Metal Heating Clamp for Drums (AF Range)
- AF Range
- Very robust construction based on elements with stainless steel AISI 321 or 304L tube covered with a galvanised steel layer.
- Standard model for drums 200 Lts (Ø580 mm).
- Tubular elements with stainless steel AISI 321 or AISI 304L tube.
- The outside of the clamp is insulated by a mineral sheet protected by a galvanised layer.
- Closing with double buckle.
- Power: 1,3 KW (2x650 W)
- Standard voltage ~230 V
- Other dimensions and voltages are available on request
Learn More€439.00