Electric Heating

• Medium wave heating equipment
• Models FIRM
• Infrared heating units
• Standard voltage ~230 V

• Short wave heating equipment
• Models FIRC
• Infrared heating units
• Standard voltage ~230 V

• For food industry
• AISI 316L Ø10mm stainless steel pipe.
• Connection box, separators and connection ring in AISI 316L stainless steel.
• Unit surface finish: Electropolished.Watertight connections box, with IP-67 damp protection rating.
• Cable connection lead of 4 wires (3-phases + earth) of 2.5mm2 section and 10,000 mm long.
• Non-toxic blue outer covering of the cable lead suitable for food applications.
• Grey polyamide PG16 stuffing box.
• Class I electric element.

• AFCCB Range
• Standard voltage: ~230 V
• 3 Meter Braided Power Cable.
• Class I
• Adjustable thermostat 0 / 90 °C. On request with adjustable thermostat 0 / 40 °C.
• Sheath made from a water resistant, flame retardant, polyurethane nylon.
• Quick release buckles for easy installation and removal.

 R316 is a power regulator built in IP65 encolsure for 1,2 & 3 stage or modulating gas and oil burners

• Designed according to the class of protection EN 60.259
  
• Dimensions Enclosure: 110(H) x 150(W) x 168 (D) mm
• 2 displays which show the actual value and the setpoint as well
• The installed controller is a Jumo dTRON 316 controller
• Input selection: Pt 100, Pt 500, Pt 1000, 0/4-20 mA, 0/2-10 V, 0-10 V, transmitter 100-4.000 Ohm and Thermocouple (B,J,K,L,N,R,S,T,U)

• Models TFAN
• for Air Heating
• Models available with elements in stainless steel tube AISI 321 Ø10 mm
• Heating of air up to: 250 °C TFAN models, 600 °C Made on special request
• Minimum air speed for all models: 2 m/sec
• Easily interchangeable heating elements
• Other wattage, voltages, and dimensions are available on request.
• Manufactured in compliance with the EN 60335-1 standard.
• Triphase power supply 3 ~ 400 V with earth connection 

• With very low density load for hydraulic oil groups
• Degree protection against moisture IP66.
• Profile in black aluminum.
• Supports base in galvanized steel with two powerful magnets to fix the resistance to metallic deposits and at the same time to attract metallic particles in suspension.
• Fixed temperature thermostat at 28 °C with differential of 11 °C.
• Silicone hose cable of 3x0,75 mm² with PG9 for tank exit
• PG9 for cable hose.
• Watertight gaskets.
• Optional: If you require, we can supply finished CMG heater with 3/8” pressure connection with metallic mesh of 1200 mm length

• Standard voltage ~230 V
• Class II.
• Supply Lead:
  - 1mm² Twin Core rubber insulated conductors
  - Neoprene sheathed
• Temp. Control:
  - 20° to 120°C
  - Adjustable Capillary Thermostat.
• Heater Material:
  - Silicone rubber / Glass fibre sheet
  - Double Insulated Construction.

• Model IM
• The IM3,6 model includes the transportable trolley
• Watts: 3600W
• Volts: ~230V
• Spectral field wavelength: 1,5 to 7 µm
• Polished aluminium reflector to ensure good diffusion of heating
• Chrome-plated steel protective grill to prevent accidental contact with the heating element.
• Class I electrical device
• Degree protection against moisture IP44
• Connection cable H05RN 3x1'5 with 1500 mm long, with 16A connector Schuko type
• Safety thermostat with manual reset
• You can orientate the emitter with four fixed positions by means of a simple action to the side handle.