The CMG heater is designed for maintening temperature in tanks of hydraulic oil or other materials in which a stable temperature of approximately 25 °C is needed (starting up of hydraulic groups, etc.). Thanks to the large surface of the aluminum radiator we obtain a really low density load of the heater, ensuring a maximum surface temperature of the element of 60 °C, even working dry. In this way we avoid risks of oil cracking, prolonging the element life. The heater incorporates two powerful magnets which, apart from being used to fix a position in the metallic tank, attract potential small magnetic particles in suspension that could damage the hydraulic groups.

General characteristics

• Degree protection against moisture IP66.
• Profile in black aluminum.
• Supports base in galvanized steel with two powerful magnets to fix the resistance to metallic deposits and at the same time to attract metallic particles in suspension.
• Fixed temperature thermostat at 28 °C with differential of 11 °C.
• Silicone hose cable of 3x0,75 mm² with PG9 for tank exit
• PG9 for cable hose.
• Watertight gaskets.
• Optional: If you require, we can supply finished CMG heater with 3/8” pressure connection with metallic mesh of 1200 mm length

Usual applications

• Hydraulic oil baths
• Positioners
• Lifts
• In general, all baths that need a stable calorific input to maintain a temperature of 25 °C.